Why Add a Mesh Insert to Your UltaMid 4?
The UltaMid 4 is a spacious pyramid shelter, but its open floor leaves you exposed to crawling and flying insects. The UltaMid 4 Mesh Insert, No Floor solves that by adding a bug barrier that weighs almost nothing. It clips inside your existing shelter, creating a dedicated bug-free zone for sleeping, eating, or relaxing without adding a heavy inner tent.
Setting Up the Mesh Insert
Setup is straightforward because the insert is designed to work with the UltaMid 4's existing attachment points. Follow these steps for a secure, draft-free fit.
- Pitch your UltaMid 4 first: Set up the outer fly as you normally would. Make sure the shelter is taut and well-pegged, since the insert will hang from the same structure.
- Attach the insert inside: The UltaMid 4 Mesh Insert connects easily to the interior of the UltaMid 4. Use the provided attachment points to clip or tie it in place around the perimeter.
- Adjust for condensation control: The insert is built slightly smaller than the shelter's footprint. This gap helps minimize condensation by allowing airflow between the fly and the mesh. Don't over-tighten the fit.
- Check the entry and exit: Make sure the insert's opening aligns with your shelter's door. Test that you can enter and exit without snagging the mesh.
No Floor? Here's What That Means
This insert has no bathtub floor, which saves weight and bulk. It's ideal for dry ground, but if you expect moisture, the supplied information recommends adding a separate floor. Without a floor, you'll need a ground cloth or footprint to keep your gear off the dirt. The insert itself stays light—perfect for ultralight purists.
What You Get with the UltaMid 4 Mesh Insert
- UltaMid 4 Mesh Insert, No Floor: Built with NoSeeUm mesh, it fits slightly smaller than the UltaMid 4 perimeter to minimize condensation. The fine mesh keeps even tiny biting insects out, and the intentional gap reduces interior moisture buildup on cool nights.

UltaMid 4 Mesh Insert, No Floor - UltaMid 4 Mesh Insert, No Floor: Easily connecting to the UltaMid 4, it creates a lightweight, bug-free environment for eating, relaxing, or resting. You don't need tools or modifications—just clip it in and enjoy protection from mosquitoes, flies, and crawling bugs.
Tips for Best Performance
Keep the mesh taut but not stretched to avoid tears. If you're in a bug-heavy area, seal any gaps at the base with a ground cloth. For wet trips, consider pairing the insert with a floor—the supplied information notes that while it excels at bug protection, a floor is recommended in moisture-rich environments. Store the insert dry to prevent mildew on the mesh.


