Start with the right size and shape
The Flat Tarp comes in two sizes: an 8'6" square and an 8' x 10' rectangular. The square offers a compact footprint that suits solo campers or tight pitches, while the rectangular size gives you more coverage and a longer ridgeline for two-person setups or harsher weather. Both are made from 100% waterproof Dyneema® Composite Fabrics with fully bonded seams, so they stay sag-free even in heavy rain.
Your choice of size should match your typical terrain and weather. A square tarp is easier to pitch in tight spots and works well for low, storm-resistant configurations. The rectangular tarp provides more living space and flexibility for different pitches, but it needs a larger clearing.
Flat Tarp options at a glance
- Flat Tarp: Available in 8'6" square or 8' x 10' rectangular, in White or Spruce Green. Size and color affect visibility and coverage; choose based on your campsite and preference.

Flat Tarp - Flat Tarp: Crafted from 100% waterproof Dyneema® Composite Fabrics with fully bonded seams, designed to stay sag-free even in heavy rain. This means you can pitch confidently in wet conditions without the tarp sagging overnight.
Basic flat tarp setup: a step-by-step approach
These steps assume you have adjustable trekking poles (sold separately) and a selection of stakes. The Flat Tarp has 16 reinforced perimeter tie-outs and 6 body tie-outs, giving you plenty of attachment points for a secure pitch.
- Choose your pitch shape: Decide between an A-frame, lean-to, or flat pitch based on weather and terrain. The non-catenary cut and square corners offer maximum pitching flexibility.
- Stake out the corners: Start by staking the four corners (or the two corners and two midpoints for a rectangular tarp) to define the footprint. Use the perimeter tie-outs for this.
- Set your trekking poles: Adjustable trekking poles (sold separately) make setup quick and easy. For an A-frame, place one pole at each end of the ridgeline and adjust height to tension the tarp.
- Tension the ridgeline: Use the body tie-outs along the center to create a taut ridgeline. The low-stretch Dyneema® fabric ensures a stable pitch.
- Secure the perimeter: Stake out remaining perimeter tie-outs, pulling fabric taut but not so tight that it distorts the shape. Adjust as needed for wind direction.
Pitching for wind: lower and tighter
When wind is in the forecast, pitch the tarp lower to the ground and use more tie-outs to minimize flapping. The Flat Tarp's 16 perimeter tie-outs let you add extra guylines for stability. Face the lowest edge into the wind and consider a lean-to or a low A-frame with the windward side staked close to the ground. The Dyneema® fabric's low stretch helps maintain tension, but always check your stakes and tension before turning in.
Tie-out layout: using the perimeter and body points
The Flat Tarp has 16 reinforced perimeter tie-outs and 6 body tie-outs. Here's how to use them effectively:
- Perimeter tie-outs: Use these for staking corners, midpoints, and edges. They define the shape and tension of your pitch.
- Body tie-outs: These are located along the center of the tarp. Use them to create a ridgeline or to lift the center for more headroom in an A-frame pitch.
- Modular options: With nearly unlimited pitching options, you can customize your setup for any environment. For example, use extra tie-outs to create a porch or to close one end in windy conditions.
What the supplied information doesn’t cover
The supplied product information does not include specific stake quantities, guyline lengths, or detailed care instructions for the Flat Tarp. For those details, refer to the full product documentation or contact Hyperlite Mountain Gear directly. This guide focuses on the supported setup facts to help you pitch confidently.


