How to Attach Skis to Your Pack with the Diagonal Ski Carry Kit

Quick Answer

The Diagonal Ski Carry Kit lets you attach skis diagonally across your Hyperlite Mountain Gear pack in under a minute, keeping your hands free and your center of gravity stable.

How to Attach Skis with the Diagonal Ski Carry Kit

1. Position the Kit on Your Pack: Locate the daisy chain or attachment loop on the upper side of your pack. Thread the Diagonal Ski Carry Kit’s webbing through that loop so the buckle faces outward. Make sure the webbing is not twisted; a twisted strap can loosen during movement.
2. Place Skis Diagonally Across the Pack: Hold your skis together (bases facing each other) and lay them diagonally across the pack, with the tips pointing toward the top of the pack and the tails toward the bottom. The skis should rest against the side of the pack, not on top of the shoulder straps. If the skis are too long, angle them slightly more vertical to keep the tips from hitting your head.
3. Secure the Strap Around the Skis: Wrap the Voile strap around both skis and through the buckle. Pull the strap tight until the skis are snug against the pack. The strap should hold the skis firmly but not compress the pack’s contents. Check that the strap is not pressing on any ski edges—edges can cut the strap over time.
4. Test the Attachment: Before hitting the trail, give the skis a firm shake. They should not slide or wobble. If they move, tighten the strap further or reposition the skis slightly. A loose attachment can shift your balance; always re-check after the first 10 minutes of hiking.

Product Used in This Guide

• Diagonal Ski Carry Kit: The Diagonal Ski Carry Kit uses a Voile strap to secure skis to your pack. Color may vary. The strap is strong and easy to adjust, so you can cinch skis tightly without tools, even with gloves on.